MUSIC/ AUDIO

Polar pattern : Cardioid

Frequency response (+/- 3 dB): 50 - 17000 Hz

Sensitivy 1 Khz : -52 dB +/-3dB

Impedance : 400 Ohm

Connector : 3 pin XLR male

Weight : 320 gr

Dimensions : L.180 mm x 44 mm

Vocal microphone/ Dynamic capsule

Cardioid polar pattern

Flat + extended frequency

ON/OFF switch

Exceptional transparency at mid-bass frequencies

Ergonomic barrel design

Dynamic Capsule

Cardioid polar pattern

Flat + Extended frequency response

ON/OFF switch

Optimal warmth and clarity

Excellently accurate pickup pattern

Polar Pattern: Cardioid

Frequency response: 60 - 14.000 Hz

Impedance: 600 ohm

A/D converter: 16 bit at 48 Khz sampling rate

Connector: 3 pin xlr

Connection standard: USB 1.1 , USB 2.0

Weigth: 290 g

Dimension: H.185 mm x Ø 51 mm

Permanently polarized condenser capsule

Switchable cardioid / uni-directional polar pattern

Switchable sensitivity for shotgun or handheld applications (switch OFF/NORMAL/TELE)

Phantom / battery powering

Combines advantages of half shotgun with handheld interview mic

Permanently polarized mic

Cardioid polar pattern

Light and rugged construction

High applicable SPL (close miking)

Suited for instruments

Headset selectable frequency / Dual channel

Frequency range: 863 - 865 Mhz

Frequency response: 50 Hz - 15 KHz

PLL transmission

Range: 30 meter / 100 feet

Cardioid dynamic capsule

Low-profile desktop receiver (2 foldable antennas)

4 selectable channels

ABS carrying and storage case

Headset selectable frequency / Dual channel

Frequency range: 863 - 865 Mhz

Frequency response: 50 Hz - 15 KHz

PLL transmission

Range: 30 meter / 100 feet

Condenser headset with cardioid capsule

Low-profile desktop receiver (2 foldable antennas)

4 selectable channels

ABS carrying and storage case

Stereo In-ear Monitor System
RM3000 Transmitter

8 selectable frequencies in 863 - 865 MHz

Audio level indicators (L&R)

Channel selector and display

Audio input level control

Combo inputs (XLR + JACK)

Selectable mono or stereo mode

RM3000R Bodypack Receiver

8 selectable frequencies in 863 - 865 MHz 

LCD display plus RF and AF indicators

Battery level indicator

Headphone output 2x100 mW @ 16 ohm

Selectable limiter and equalizer

Selectable mono or stereo mode

Up to 5 hours of use from 2 x 1.5 V  AA  battery

Loudspeaker System, 2-way vented enclosure:

High Frequency Device 1” compression driver with 1” VC | Low Frequency Device 10” woofer, 1.5” voice coil | Angular Coverage 90° H x 60° V

Nominal Impedance 8Ω | Power Rating (continuous) 150W, (program) 300W, (peak) 600W | Frequency Response 70-20 kHz  | Sensitivity 93dB @ 1 W/1 m | Connectors 2 x SPEAKON linked | Weight 11 kg | Construction Polypropylene | Mounting Pole 1 x bottom | Dimensions 320 x 500 x 290 mm 

Loudspeaker System, 2-way vented enclosure:  High Frequency Device 1” compression driver with 1.35” VC | Low Frequency Device 12” woofer with 2” voice coil | Angular Coverage: 90° H x 60° V

Nominal Impedance 8Ω | Power Rating (continuous) 200W, (program) 400W, (peak) 800W | Frequency Response 60 Hz - 20 kHz | Sensitivity 94dB @ 1 W/1 m  | Connectors 2 x SPEAKON linked

Weight 14 kg | Construction Polypropylene | Mounting Pole 1 x bottom | Dimensions 390 x 620 x 350mm 

Loudspeaker System, 2-way vented enclosure:  High Frequency Device 1” compression driver with 1.35” VC | Low Frequency Device 15” woofer with 2.5” voice coil | Angular Coverage 90° H x 60° V

Nominal Impedance 8Ω | Power Rating (continuous) 250W, (program) 500W, (peak) 1000W | Frequency Response 50- 20 kHz | Sensitivity 95dB @ 1 W/1 m   Connectors 2 x SPEAKON linked | Weight 18 kg | Construction Polypropylene | Mounting Pole 1 x bottom | Dimensions 480 x 740 x 430 mm 

2-way Loudspeaker System
1” high-definition compression driver with 1.35” VC and titanium diaphragm
Wide-coverage 90° x 60° constant directivity horn
12” long-excursion woofer with 2.5” voice coil
SPL 1w/1m: 99 dB
Lightweight, compact and ultra-durable PP cabinet
3 ergonomic aluminum handles for effortless transportation
Slanted symmetrical shape for the use as a stage monitor
Four M10 flying points 

2-way Bi-amped Loudspeaker System
1” NEODYMIUM compression driver
Constant coverage 90° x 60° horn
High-excursion 12” woofer with 2” VC
600 W Class D + AB power amplifier with SMPS
Integrated active processor with dual LIMITER circuit 
MIC/LINE input with 2-band EQ
SPL MAX: 124 dB
Ultra-lightweight reinforced polypropylene cabinet
Top handle for effortless transport
Slanted shape for the use as a stage monitor
Four M10 flying points
13 kg total weight 

Active 2-way Coaxial Stage Monitor | 1” compression driver with 1.35” VC | 12” woofer with 2.5” VC | 350 W total power (700 W peak) | 300 W class D + 50 W class | AB power module with SMPS | Dual LIMITER circuit | 2 EQ PRESETS for Monitor or FOH (Front-Of-House)

SPL MAX 124 dB | Frequency response 50 Hz - 20 KHz | Low-profile, lightweight plywood cabinet with ultra-durable paint

Loudspeaker Stand

Base dimension: Ø 1120 mm

Height: 1460- 2060 mm

Weight: 2,80 kg

Maximum lo adding weight: 60 kg

Available colors: Matt black

Upper end tube: Ø 35 mm

Loudspeaker Stand:

Base dimension: Ø 1320 mm

Height: 1350 mm - 2150 mm

Weight: 1,70 kg

Maximum loading weight: 35 kg

Available color: Matt black

Upper end tube: Ø 35 mm

With the combination of strong output stages in class AB and a reliable  switching power supply, the HPX900, can deliver 900 watts total at 2 ohm  load making it a very convenient source of power in even the most  demanding sound reinforcement applications. Light-weight and easily manageable, the HPX series amplifiers offer practicality as one of their primary features. 

With the combination of strong output stages in class

AB and a reliable switching power supply, the HPX1200,

can deliver 1200 watts total at 2 ohm load making it a

very convenient source of power in even the most

demanding sound reinforcement applications.

 DPX PFC is a series of ultra-lightweight power amplifiers able to  provide, for professional mobile and fixed PA systems, a huge amount of  power and the maximum performance and portability in a very affordable  package.
Thanks to the high-density Class D technology employed in the output  stages, we’ve been able to build very powerful amplifiers in an  ultra-compact and lightweight package.